ISSN 1008-5548

CN 37-1316/TU

2015 Vol.21  No.5 Go Back
Numerical Simulation on Warm Compaction of Poplar Powders(点击: Preparation of Superfine SiC Powders by Ball Milling Method(点击: Influence of Crystalline Forms and Chemical Composition on Oxidation Performance of SiC Powders(点击: Research on Classification Performance of Vertical Turbine Classifiers(点击: Energy Consumption Analysis and Numerical Simulation Research of Classifier Rotor(点击: Preparation of Red Mud-Metakaolin Geopolymers and Research of Hydration Mechanism(点击: Experimental Research on Cementitious Property of Renewable Powders of Construction Waste(点击: Strength of High Phosphorus Hematite-Carbon Pellets(点击: Properties of Natural Rubber Synergistically Reinforced by Attapulgite Clay and Carbon Black Powders(点击: Progress of Research on Phosphors for White Light Emitting Diodes(点击: Preparation of Chemical Bonding Type Zinc Powders and Their Corrosion Resistance(点击: Preparation of Equivalent Spherical Toners by Controlled Air Grinding Technology(点击: Influence of Coating Layer Thickness of Particles on Property of Magnetorheological Fluid(点击: Influence Mechanism of Microstructure of Foam Concrete on Macroscopic Properties(点击: Research on Degradation of Aqueous Cr(Ⅵ) and Formaldehyde Simultaneously by TiO2-Zeolite Photocatalytic Ma...(点击: Research on Diatom Mineral Content of Each Grain Size from Niger Diatomite(点击: Influence Factors of Surface Modification of Diatomite Powders by Dry Method(点击: Screening Characteristics and Efficiency of New Swing Surface(点击: Preparation of Oil Soluble Fe3O4Nano-particles by Chemical Coprecipitation Method(点击: Strength Activity Characteristic and Mechanism of Waste Glass Powders(点击: Influence of Inert Mediums on Minimum Ignition Temperature of Coal Dust(点击: Experimental Study on Minimum Ignition Energy of Mg-Al Alloy Powders(点击: Effect of Screw Core Sizes on Atomizing Characteristics of Nozzle(点击: