ISSN 1008-5548
CN 37-1316/TU
Home
About Journal
Introduction of Journal
Statement of Publishing Ethics
Identification And Treatment of Academic Misconduct
Policy of Open Access
Copyright Transfer Agreement
Submission Template
Guidelines for Author
Editorial Board
The 8th Editorial Board
International Editorial Board
Advertising and Distribution
Contact Us
Chinese
Online First
Go Back
Structure and properties of graphene oxide-reinforced epoxy resins and vitrimers
（点击：
）
A review of development and application of laser particle size measurement technology and application
（点击：
）
Research progress on micro-and nanobubble technologies from a particuology perspective
（点击：
）
Research progress on aerosol radiative and weather-climate effects in China
（点击：
）
Research progress on measurement technologies for atmospheric aerosol particle mass concentration
（点击：
）
Preparation and application of cobalt-copper bimetallic catalysts
（点击：
）
Preparation of sodium iron thiosulfate⁃modified steel slag and its total chromium removal performance
（点击：
）
Research progress on radioactive dust in magnetic confinement fusion devices
（点击：
）
Research progress on preparation and applications of lead-free perovskite materials
（点击：
）
Comparative analysis of separation efficiency for sand particles and raindrops in inertial particle separator...
（点击：
）
Research progress on metrology of dust concentration monitors
（点击：
）
Numerical simulation of melting performance of core-shell composite phase change materials
（点击：
）
Development of glass microbead particle size distribution reference materials and their application in perfor...
（点击：
）
Preparation and properties of porous alumina ceramics by UV-curable 3D printing
（点击：
）
Numerical simulation of infiltration behavior of aluminum melt in porous preforms
（点击：
）
Study on compressive strength of desert sand mortar based on nondestructive testing
（点击：
）
Research progress in energy retention and desensitization strategies and regulation technologies for high⁃en...
（点击：
）
Research progress on triboelectric textile‑based sensors for complex curved surfaces
（点击：
）
Intelligent optimization of sulfur wet granulation equipment based on CFD simulation
（点击：
）
Effect of LiF-CaF2 on phase transition and morphology of Si3N4
（点击：
）
Numerical study on influence of time dependence on printability of cement⁃based materials
（点击：
）
Research progress on carbon⁃based single⁃atom catalysts for catalytic degradation of organic small-molecule...
（点击：
）
Research progress on influence mechanism of combustion catalysts on thermal decomposition of RDX
（点击：
）
Research progress in particle measurement technologies
（点击：
）
Effects of anti⁃back⁃mixing cones on performance of axial flow cyclone separators
（点击：
）
Synergistic regulation of nitrogen doping and oxygen vacancies on photocatalytic performance and mechanism of...
（点击：
）
Optimization design of reciprocating spreading process based on EDEM simulation
（点击：
）
Transport mechanisms of pharmaceutical powder particles in a realistic oral cavity model
（点击：
）
Properties of walnut shell powder‑modified waste wind turbine blade powder‑filled polypropylene composites
（点击：
）
Influence of initial position on inertial migration of particles in circular pipe Poiseuille flow
（点击：
）
Advances in removal technologies of organic carbon and trace urea from ultrapure water
（点击：
）
proportion optimization and performance regulation of cement mortar with low water-binder ratio
（点击：
）
Collaborative calibration method and verification of discrete element parameters for multi-morphology bulk ma...
（点击：
）
Plasma preparation of TiN nanoparticles using a TiCl4-NH3 system
（点击：
）
Preparation of equiaxed silicon nitride powders by silicon imine ball milling
（点击：
）
Numerical simulation of gas-solid flow and structural optimization of a vertical bag filter
（点击：
）
Parameter calibration of discrete element method for NdFeB alloy particle flowability based on JKR model
（点击：
）
Preparation and adsorption performance of porous magnesium hydroxy silicate with high specific surface area p...
（点击：
）
