ZOU Hongsheng1, TANG Kaijing2, YANG Fei1, ZENG Bo1, CHEN Sijie1, CHEN Haiyan1
(1. School of Environment and Resource, Southwest University of Science and Technology, Mianyang 621010,China;2. Department of Materials Engineering, Mianyang Vocational and Technical College, Mianyang 621000, China)
Abstract: Taking coal-fired power plant fly ash as the research object, the fly ash was pulverized by ball milling process and steam jet milling process, and a more comprehensive comparative study of the particle size distribution, mineral composition, particle morphology, Zeta potential and 28 d activity index of the powder particles was carried out. The results show that the particle size distribution of ultra-fine fly ash prepared by steam jet mill is uniform, and its activity index is significantly higher than that of ultra-fine fly ash prepared by ball mill. The activity of fly ash increases significantly with the decreasing of its particle size. In the condition of 30% of ultrafine fly ash and D50=5.14 μm, its activity index can reach 104.5%.
Keywords:fly ash; ball mill; steam jet mill; activity index
中图分类号:TK09
文献标志码:A
文章编号:1008-5548(2021)02-0047-07
DOI:10.13732/j.issn.1008-5548.2021.02.007
收稿日期: 2020-09-26, 修回日期:2020-11-06,在线出版时间:2020-12-22 16:22。
基金项目:四川省教育厅自然科学基金项目,编号:18ZA0498;四川省应用基础研究基金项目,编号:2018JY0438。
第一作者简介:邹红生(1996—),男,硕士研究生,研究方向为固体废弃物的资源化利用。E-mail:374126025@qq.com。
通信作者简介:陈海焱(1964—),男,博士,教授,博士生导师,研究方向为气流粉碎、气流分级与通风除尘技术。E-mail:chenhai-yan@163.com。