ISSN 1008-5548

CN 37-1316/TU

Journal Online  2013 Vol.19
<Go BackNo.4

Effects of Binder Content on Morphology and Physical Property of Spray Granulated Molybdenum Powders

FU Jingbo, ZHUANG Fei , ZHANG Xiao

(Technical Center, Jinduicheng Molybdenum Co. Ltd., Xi'an 710077, China)

Abstract:The spray granulated molybdenum powders were prepared by centrifugal spray drying.The effects of binder content of slurry on the morphology of spray granulated molybdenum powders and their apparent density were investigated. The results show that when the mass fraction of binder content in slurry is less than 2.2%, most of the spray granulated molybdenum powders are fine and broken particles, and their apparent density increases with the increase of binder content. While the binder content of slurry is more than 2.2%, most of spray granulated molybdenum powders are non-spherical particles with rough surface, and their apparent density decreases with the increases of binder content.

Keywords:molybdenum powders; binder; spray granulation

中图分类号:TG115,TF125.3               文献标志码:A

文章编号:1008-5548(2013)04-0081-03

DOI:10.3969/j.issn.1008-5548.2013.04.020

收稿日期:2013-05-10,修回日期:2013-05-27,在线出版时间:2013-08-25。

第一作者简介:付静波(1972—),女,博士,工程师,主要从事钼及钼合金研究工作。 E-mail:jingbo_fu@126.com。