ISSN 1008-5548

CN 37-1316/TU

Journal Online  2013 Vol.19
<Go BackNo.5

A New Method for Calculating Curve Equation of Silo

ZHANG Xiaolong, LI Zhaofeng

(College of Materials and Mineral Resources, Xi’an University of Architecture and Technology, Xi’an 710055, China)

Abstract:Based on the pressure distribution within the conical silo, a new method of calculating the curved silo can be obtained. The results show that under the assume that the dip angle of tangent in silo wall changes uniformly in horizontal direction, the structure equation of curve silo shaped like y =Alnx +B can be calculated. At the same height of the silos, the vertical pressure on curve silos is smaller than that on conical silo, so the phenomenon of blocking materials and arching does not occurred. After determining the size of feed inlet, the equation of discharge port of the tangent angle with the size of discharge port can be gained to avoid blocking material and arching and ensure the uniformity and stability.

Keywords:logarithmic curve; curve equation; wall friction angle; silo

中图分类号:TQ053            文献标志码:A

文章编号:1008-5548(2013)05-0084-03

DOI:10.3969/j.issn.1008-5548.2013.05.018

收稿日期:2013-03-09,修回日期:2013-05-09,在线出版时间:2013-10-25。

第一作者简介:张晓龙(1988—),男,硕士研究生,研究方向为粉体物料的储存与运输。电话:029-82202255,13772077572,E-mail:feilongzaitian0306@126.com。

通信作者简介:李兆锋( 1963— ),男,副教授,研究方向为悬浮预热预分解技术及硅酸盐水泥工艺理论与设备开发。 E-mail:zfli2002@sina.com。