ZHU Feilong, WU Kai, DING Wuxue, PENG Binbin, SUN Yu
(School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China)
Abstract:A simplified model of powder rolling process was established and the Drucker-Prager Cap constitutive model set in Abaqus software was used to analyze the influences of powder material properties, friction coefficient, gap between roller and ring die on the rolling process by finite element simulation technique. The results show that with the various powder materials, the extrusion pressure to form particles is also different. Stress imposed on the powder materials increases with the increase of friction coefficient and the decrease of gap between roller and ring die, it can make the material easier to be extruded from the die hole and improve the pellets quality.
Keywords:pellet; rolling; powder; ring die; simulation
文章编号:1008-5548(2013)06-0001-04
DOI:10.3969/j.issn.1008-5548.2013.06.001
收稿日期:2013-03-19,修回日期:2013-03-24,在线出版时间:2013-12-25。
基金项目:江苏省自然科学基金项目,编号:BK2011706;江苏省产学研联合创新资金——前瞻性联合研究项目,编号:BY2012023;江苏省六大人才高峰项目,编号:2010-JXQC-080。
第一作者简介:朱飞龙(1988—),男,硕 士 研 究 生,研究方向为饲料机械。 E-mail:fei12long@126.com。
通信作者简介:武凯(1972—),男,博士,副教授,研究方向为先进制造工艺与装备、先进切削加工技术。 电话:13813951936, E-mail: wukai@njust.edu.cn。