ZHANG Hongwei a, WANG Yanmin a, b, PAN Zhidong a, b
(a. College of Materials Science and Engineering; b. Key Lab for Special Functional Materials of Ministry of Education, South China University of Technology, Guangzhou 510640, China)
Abstract:The numerical simulation of single-phase turbulent flow behaviors such as velocity magnitude, velocity gradients, shear stress, turbulence intensity and turbulent transmission in an impeller stirred media mill at different shaft speeds was carried out by computational fluid dynamics. The fluid velocities of single-phase flow (water) in stirred mill grinding chamber were measured. The results indicate that the flow between the rotor discs relates to whirlpool and randomness due to the enhanced flow dispersion. The local energy dissipation is non-uniform because the energy dissipation occurs in a small zone around the discs and the wall, where the effective grinding occurs. The fluid shear stress increases linearly with velocity gradient of the flow. In a certain range, the flow velocity and the gradient both increase while increasing the shaft speed. The fluid velocities measured by Pitot tube are consistent to the simulated results. The difference between the simulated and experimental data is slight enough to show that the method could be used for simulation purpose.
Keywords:stirred media mill; numerical simulation; single-phase flow; velocity gradient; energy
文章编号:1008-5548(2013)06-0009-08
DOI:10.3969/j.issn.1008-5548.2013.06.003
收稿日期:2013-03-24,修回日期:2013-04-17,在线出版时间:2013-12-25。
第一作者简介:张宏伟(1985—),女,硕士研究生,研究方向为纳米材料的制备。 电话:020-87114883,E-mail:hongway3922@163.com。
通信作者简介:王燕民(1956—),男,博士,教授,研究方向为纳米材料的制备。 电话:020-87114883,E-mail:wangym@scut.edu.cn。