ISSN 1008-5548

CN 37-1316/TU

Journal Online  2013 Vol.19
<Go BackNo.6

Preparation of TiO2-Barite Pigments by Mechano-chemistry Method

WANG Yang, LI Zhen, WU Huijun, SHEN Shangyue

(School of Materials Science and Chemistry, China University of Geo-sciences (Wuhan), Wuhan 430074, China)

Abstract:TiO2-barite pigments were prepared through mechano-chemistry method taking barite powders as raw materials. By comparing the dry and wet process obtained TiO2-barite composite pigments, dry preparation was determined. The dry preparation of TiO2-barite pigment process conditions impact on the properties was focused. The results show that the optimum technical conditions are that the recombination time is 1.5 h, the TiO2 content is 40%, the mass ratio of ball to powder is 4:1. Under these conditions, the hiding power of TiO2-barite pigments can reach more than 80% of TiO2 powders and the coating effect is best.

Keywords:barite-TiO2 pigment; mechano-chemistry method; hiding power

中图分类号:TB332                  文献标志码:A

文章编号:1008-5548(2013)06-0032-05

DOI:10.3969/j.issn.1008-5548.2013.06.008

收稿日期:2013-05-03,修回日期:2013-05-27,在线出版时间:2013-12-25。

第一作者简介:王洋(1992—),男,硕士研究生,研究方向为无机非金属材料复合。 E-mail:1025223454@qq.com。

通信作者简介:李珍(1963—),女,博士,教授,研究方向为矿产资源及开发应用。 电话:027-67884283, E-mail: zhenli@cug.edu.cn。