ISSN 1008-5548
CN 37-1316/TU
Home
About Journal
Introduction of Journal
Statement of Publishing Ethics
Identification And Treatment of Academic Misconduct
Policy of Open Access
Copyright Transfer Agreement
Submission Template
Guidelines for Author
Editorial Board
The 8th Editorial Board
International Editorial Board
Advertising and Distribution
Contact Us
Chinese
2025 Vol.31 No.5
Go Back
Article
Preparation of aluminum coating for nuclear fuel particles by fluidized bed-chemical vapor deposition
Preparation of ceria-based copper catalysts and their degradation performance for sodium oxalate
Structure and performance regulation of Mg2+，Zr4+co-doped ZnGa2O4∶Cr3+based near-infrared long persistent luminescence phosphors
Effect of carbonation treatment on properties of recycled concrete aggregates
Effects of lime and fly ash dosage on durability of recycled aggregate-raw soil composite
Formulation optimization for ternary geopolymers based on simplex centroid design method
Surface wear of cement kiln SCR denitrification catalyst based on CFD-DEM
Damage mechanisms of diamond-silicon carbide composites during femtosecond laser cutting
Process parameter optimization for natural graphite purification via composite molten salt method
Effect of moisture content on electrostatic charging of PVC powder in pneumatic conveying
Article
Preparation of aluminum coating for nuclear fuel particles by fluidized bed-chemical vapor deposition
Preparation of ceria-based copper catalysts and their degradation performance for sodium oxalate
Structure and performance regulation of Mg2+，Zr4+co-doped ZnGa2O4∶Cr3+based near-infrared long persistent luminescence phosphors
Effect of carbonation treatment on properties of recycled concrete aggregates
Effects of lime and fly ash dosage on durability of recycled aggregate-raw soil composite
Formulation optimization for ternary geopolymers based on simplex centroid design method
Surface wear of cement kiln SCR denitrification catalyst based on CFD-DEM
Damage mechanisms of diamond-silicon carbide composites during femtosecond laser cutting
Process parameter optimization for natural graphite purification via composite molten salt method
Effect of moisture content on electrostatic charging of PVC powder in pneumatic conveying
Article
Preparation of aluminum coating for nuclear fuel particles by fluidized bed-chemical vapor deposition
Preparation of ceria-based copper catalysts and their degradation performance for sodium oxalate
Structure and performance regulation of Mg2+，Zr4+co-doped ZnGa2O4∶Cr3+based near-infrared long persistent luminescence phosphors
Effect of carbonation treatment on properties of recycled concrete aggregates
Effects of lime and fly ash dosage on durability of recycled aggregate-raw soil composite
Formulation optimization for ternary geopolymers based on simplex centroid design method
Surface wear of cement kiln SCR denitrification catalyst based on CFD-DEM
Damage mechanisms of diamond-silicon carbide composites during femtosecond laser cutting
Process parameter optimization for natural graphite purification via composite molten salt method
Effect of moisture content on electrostatic charging of PVC powder in pneumatic conveying
Article
Preparation of aluminum coating for nuclear fuel particles by fluidized bed-chemical vapor deposition
Preparation of ceria-based copper catalysts and their degradation performance for sodium oxalate
Structure and performance regulation of Mg2+，Zr4+co-doped ZnGa2O4∶Cr3+based near-infrared long persistent luminescence phosphors
Effect of carbonation treatment on properties of recycled concrete aggregates
Effects of lime and fly ash dosage on durability of recycled aggregate-raw soil composite
Formulation optimization for ternary geopolymers based on simplex centroid design method
Surface wear of cement kiln SCR denitrification catalyst based on CFD-DEM
Damage mechanisms of diamond-silicon carbide composites during femtosecond laser cutting
Process parameter optimization for natural graphite purification via composite molten salt method
Effect of moisture content on electrostatic charging of PVC powder in pneumatic conveying
