ISSN 1008-5548

CN 37-1316/TU

2009年15卷  第6期
<返回第6期

磁热疗用磁粉产热率的影响因素

Factors Affecting on Production Rate of Magnetic Powders for Magnetic Hyperthermia

Doi:10.3969/j.issn.1008-5548.2009.06.020
作者:邢臻真,朱宏

摘要:为了研究和开发高产热率磁热疗用磁粉,综合分析了组分与粒 径、制备方法、表面包覆对磁粉产热率的影响规律,对这些因素与产热 率之间的定性关系进行了总结,并指出了其定量关系的研究方向。结果 表明;不同组分的磁粉磁性能不同因而产热率不同,相同组分不同粒径 和粒径分布的磁粉对产热率的影响存在一定的规律;制备方法影响粒 径从而对产热率有影响;合理的包覆材料和包覆量可提高产热率。 

关键词:磁粉;磁热疗;产热率

Abstract :In order to research and develop the magnetic powder with high heat production rate for magnetic hyperthermia, the effects of component and particle size, preparation method, surface coating on the heat produc­tion rate were introduced and analyzed. The qualitative relationships be­tween these factors and heat production rate were summarized respectively. The research directions on the quantitative relationships were also pointed out. It was concluded that different components of magnetic powder had different heat production rate because of different magnetic properties, the different size and size distribution of magnetic powders with the same components had certain influence law for heat production rate,the prepara­tion methods affected the size and thus affected heat production rate, the reasonable coating materials and quantity can increase heat production rate. 

Keywords magnetic powder magnetic hyperthermia heat production rate