ISSN 1008-5548

CN 37-1316/TU

2008年14卷  第5期
<返回第5期

喷动流化床喷雾造粒过程实验研究

Study on S pra ying Gra nulation P rocess in a Spout-fluidized Bed

Doi:10.13732/j.issn.1008-5548.2008.05.006
作者:卜 伟, 程 榕, 郑燕萍

摘 要: 为了研究喷雾造粒过程中影响颗粒粒径生长速率的因素,本 文中在自建的喷动流化床上,以玻璃珠为晶种,工业级碳酸钾溶液为 涂敷液,对流化气速、喷动气速、床层温度、溶液流量和浓度等因素对 颗粒生长速率的影响进行了实验研究。 实验结果表明,颗粒的生长速 率随流化气速、喷动气速、床层温度的增大先增大后减小;随溶液浓 度、流量的增大而增大。 

关键词:喷动流化床;喷雾造粒;生长速率

Abstract:In order to investigate the effective factors on growth rate of spray granules, the granule’s growth rate were researched experimentally for varying value of the parameters including the fluidizing gas velocity, bed temperature, spouting gas velocity, solution concentration and flux, with glass-beads as seed particles and potassium carbonate as granulation material. The experimental results showed that the growth rate decreased with increasing fluidized gas velocity, spouted gas velocity, temperature and increased with increasing solution concentration and flux. 

Keywords:spout-fluidized;spray granulation;growth rate