ISSN 1008-5548

CN 37-1316/TU

2009年15卷  第1期
<返回第1期

标称值1μm粒度标准物质的研制

Study of Particle Size Certified Reference Materials Nominal 1 μm

Doi:
作者:刘俊杰,张文阁,王海

摘要:为了完善我国粒度测量溯源及传递体系,满足粒度仪检定校准需求,本文中采用分散聚合的方法制备得到了单分散交联聚苯乙烯标准粒子,所得到的标准粒子球形度好、粒径分布标准偏差为1.5%。利用扫描电子显微镜和图像分析系统对其进行了定值研究,结果表明,该粒度标准物质的量值为1.28μm,定值不确定度为0.9%。

关键词:单分散;聚苯乙烯;粒度;标准物质

Abstract:For meeting the traceability need in particle size measurement and calibration of particle sizing instruments,the monodisperse crosslinked polystyrene microspheres were prepared by dispersion poly-merization in ethanol solution,and the prepared microspheres were well sphericized and the particle size distribution was 1.5%.On this basis,SEM and image analysis methods were used to determine the particle size and particle size distribution of microspheres.The results showed that the parti-cle size was 1.28 μm and the uncertainty was 0.9%.

Keywords:monodisperse;polystyrene;particle size;certified reference materials